Products: Engineering Tool: Machines Tools: Shaper Machines


Shaper Machine Cone Pulley Drive & All Geared Shaping Machines
SHAPING MACHINE SPECIFICATION TABLE
CAPACITY 12" 18" 24" 30"
Inches mm Inches mm Inches mm Inches mm
Length of Ram Stroke 12 305 18 457 24 610 30 762
Length of Ram 26 660 40 1/2 1029 50 1270 55 1699
Length of Width of Ram Bearing 26x7 660x178 28 1/2x9 724x229 33x11 1/2 838x292 39x12 46/8 975x323
Max & Minimum distance from table to Ram 10x1 257x25 15x1 406x25 18x3 457x89 19x3 483x76
TABLE                
Working surface of table 12x8 305x228 18x11 1/2 457x292 24x14 610x356 30x15 711x406
Max Table Travel Horizontal 16 1/2 419 18 457 24 610 30 750
Max Table Travel Vertical 9 229 13 350 15 381 16 406
Angular Movement of Table on either sides 60ºL 60ºR 60ºL 60ºR 60ºL 60ºR 60ºL 60ºR
TOOL HEAD                
Max. Vertical Travel of Tool Slide 5 140 6 152 6 152 8 200
Maximum Swivel of Tool Head 60ºL 60ºR 60ºL 60ºR 60ºL 60ºR 60ºL 60ºR
LENGTH OF MAIN SLIDE BASE 23" 29" 36" 41"
Length of Width of base 37x18 940x457 50x17¼ 1270x433 64x23 1600x585 72x26 1800x650
SPEED & FEEDS                
Cone Pulley Belt             3  
Dia of Clutch Pulley 9 1/4 235 12" 3 305 12" 4 305 14"  
Range of Ram speeds             4 355
Stroke per minute 3 4 4 8,16,32,48
Dia of Motor Pulley 2 1/2 30,60,90 60 2 3/4 16,32,64,96 70 2 3/4 12,24,48,72, 70 2 3/4 76
Range of Table Feed per stroke of Ram 0.009 0.229 0.009 0.229 0.009 0.229 0.009 0.229
Range of Tool Head feed                
DRIVE & ELECTRICAL EQUIPMENTS Hand Feed Hand Feed Hand Feed Hand Feed
Electric Motor 1.5H.P. 1.5H.P. 1.5H.P. 1.5H.P.
Drive Motor 1440RPM 1440RPM 1440RPM 1440RPM
Main Switch Starter ( Push Button Type ) 3.5AMP 3.5AMP 5AMP 5AMP
SPECIFICATION OF VICE                
Overall Dimensions 5" 8" 12" 13¼
Length 48 1219 62 1580 78 1981 86 2150
Width 30 762 37 940 43 1092 48 1219
Height 54 1371 55 1400 63 1600 62 1550